The unique wall panelling system is available in classic Tongue & Groove or traditional Raised & Fielded panels and has been designed to put the ‘do-it-yourself’ back into DIY. You don’t have to be an experienced joiner with specialist skills to achieve the look you desire, with just a few basic tools you can cover your walls cost-effectively in a fraction of the time.

Create a luxurious panelled look with EASipanel’s Raised & Fielded design. The traditionally-inspired panelling is the perfect blank canvas for creating a stylish new look throughout the home. Simply attach the panels to existing walls and choose a suitable paint tone or stain to enhance the naturalistic wood grain effect. Combine the panels with EASipanel’s complementary dado for a beautifully finished look.

Once painted, EASipanel Tongue & Groove is a great option for the kitchen thanks to its tough wipe-able surface and water-resistant properties. Create a Shaker-inspired or traditional country kitchen look using EASipanel Tongue & Groove as a wall covering or even to clad an island unit. EASipanel is also the ideal solution for bathroom walls. To create a glamorous, dramatic bathroom use strong colour to create a contemporary panelled look or a more muted shade to create a restful sanctuary. A couple of coats of good quality eggshell or gloss paint will give you perfect a water resistant finish ideal for a bathroom. To complete the look use EASipanel dado moulding. 

• Pre-cut in 2 size: to dado height (3’) and taller (5’) which allow you to continue the panelling up the stairs
• join seamlessly with a simple tongue and groove joint
• create a panelling effect without the need for any specialist joinery skills or tool
• panelling can be stuck directly to the wall with any ‘liquid nail’ type glue over wallpaper, ceramic tiles or straight onto plaster with little or no preparation
• EASipanel is only 6mm thick allowing you to retain your existing skirting board

Instructions: How to Provide Cutting Instructions for Sheet Material

We can cut this product for you in our in-house workshop. If you would like us to do this please follow these instructions to make sure we have all of the relevant information to enable us to cut it correctly.

We need two dimensions, in millimetres, to enable us to cut your chosen material.

If the product has a grain please list the dimension in the direction of the grain first.
E.g. if you're making a wardrobe door 1800mm x 500mm and you want the grain to run vertically (the 1800mm way) you would write it as above, 1800mm x 500mm.
If you are making a drawer front 150mm x 397mm and you want the grain to run vertically (the 150mm way) you would write it 150mm x 397mm.

In some cases a sheet can be cut in more than one way to achieve the sizes you want. If you have an intended use for your off cut please tell us so we can cut the sheet in the way that yields the size of cut you would like.

For orders with large numbers of cut pieces we use computer software to calculate the most economical way to cut the sheet. We will not accept responsibility if this method doesn't yield what you were hoping for from your sheet once it has been cut.

If you are unsure about any of your cutting please contact us before placing your order.